12 VOLTS LEAD ACID BATTERY DESULFATOR Revival Rejuvenating Battery Life Extender

Description

Shipped From The US Stock same seller from Thailand
Save you money and save the environment
12 volts lead acid battery desulfator
the basic idea behide:
Reconditioning a Lead Acid Battery
Desulfation (also know as Reconditioning or electrolyte stratification) offers a way for dead batteries to be brought back to life and for tired batteries to be rejuvenated. Desulfation will not bring batteries with a shorted cell, or worn out plates back to their former glory, but it is a valuable tool for anyone depending on battery storage for power who cannot afford to buy new batteries.

When lead sulphate crystals build up on the lead plates, it is not an easy task to remove them and thereby recondition the battery. As more and more crystallisation occurs, the voltage required to shift the crystals (dissolving them back into the electrolyte) also increases. But, if you were to put a constant high voltage through the battery it would overheat and could potentially explode. Pulse conditioning is therefore used to ensure that only the sulphate crystals are affected and the battery does not overheat.
NOTE:  not every battery can be save....you may need to do you own research. Buyer should have some electronics background..
- it can be connected full time on your car battery or any 12 volts system.
- the process can takes up to 3 weeks
- for more info you can do research on the web.
INPUT VOLTAGE                       12Vdc
OUTPUT VOLTAGE                   30V (pk-pk)
RATED CURRENT                     40mA Average at nominal 12Vdc input.
FREQUENCY RANGE               1.50 KHz.
“This device has two leads, one red, one green.  The battery should be connected to its charger in the usual manner.  The red lead from this device should be attached to the positive charger/battery connection, and the green lead from this device should be attached to the negative charger/battery connection.  This is what is called connecting the device in parallel with the charger”
INSTRUCTION
1.) The desulfator should be installed as close as possible to the battery terminals. (within 14 inches, or 35 cm)
2.) You may trim the wire leads with wire cutters/strippers to work best for your application. (shorter is better)
3.) Install the Red wire to the positive (+) terminal on your 12 volt battery.
4.) Install the Green wire to the negative(-) terminal on your 12 volt battery.
5.) Verify that the LED is on, you might also be able to hear a “buzzing” noise.
6.) The best results for recovery will occur within the first 4 weeks. If left connected longer, desulfating will continue but at a slower pace.
note:
"This device has two leads, one 
red, one green.  The battery should be
connected to its charger in the 
usual manner.  The red lead from this
device should be attached to the 
positive charger/battery connection,
and the green lead from this device 
should be attached to the negative
charger/battery connection.  This is 
what is called connecting the
device in parallel with the charger"
items are shipped by USPS within the next 24 hours after received payment, not included weekend and holiday. if you don't get the good on timing schedule please fell free to email me.
Please before you leave negative feedback or dispute contact me first, I belive we can work thing out.. negative feedback don't help solve problem...thanks.
Delivery  Time
USA, Canada
3-7 Business Days
Australia, West and North Europe 10-15 Business Days
Other country 10-28 Business Days
Shipping address
Please, make sure to provide us with correct, precise, and detailed shipping Address.
Send Time
Items will be shipped within 24 hrs upon payment received or cleared.
Note
If you don't receive items over 20 business days , please notify us.