-40%
MIDRANGE TWEETER COMPRESSION HORN 500- 10/18KHZ PMR 1.75
MIDRANGE TWEETER COMPRESSION HORN 500- 10/18KHZ PMR 1.75
MIDRANGE TWEETER COMPRESSION HORN 500- 10/18KHZ PMR 1.75
MIDRANGE TWEETER COMPRESSION HORN 500- 10/18KHZ PMR 1.75
MIDRANGE TWEETER COMPRESSION HORN 500- 10/18KHZ PMR 1.75
MIDRANGE TWEETER COMPRESSION HORN 500- 10/18KHZ PMR 1.75
MIDRANGE TWEETER COMPRESSION HORN 500- 10/18KHZ PMR 1.75

MIDRANGE TWEETER COMPRESSION HORN 500- 10/18KHZ PMR 1.75" 12.5X5" GREAT ECONO SE

$ 21.09

Availability: 18 in stock
  • Brand: PMR
  • Condition: New
  • All returns accepted: ReturnsNotAccepted
  • MPN: Does Not Apply

    Description

    ******* PLEASE SEE MY OTHER LISTINGS!!!*****
    Finally, an affordable medium sized midrange/tweeter compression horn with a decent driver that doesn't cost a fortune..
    Up for grabs are these 12.5x5" compression horns..
    These are sold as a 2 piece/ 1 3/8" screw together 18TPI set.It consists of the horn itself, and a screw on driver..
    The lense is a heavy molded ABS that weighs almost a pound itself..
    They are an 8 ohm impedance, a high SPL of 102.5dB, and a smooth response of 500 Hz to 10KHz, but usable to 18 KHz if you are OK with a -5dB response above 10KHz,...
    Thew compression driver is a heavy/large TITANIUM diaphragm, and is 1.75" voice coil instead of the usual 1" in this price range..
    Combination 1.75" titanium dome tweeter attached to a 5.0" x 12.50"  midrange horn
    26oz. magnet
    150W/250W RMS/Peak power capacity
    Titanium dome
    1.75" voice coil
    Sensitivity: 102.5dB (W/M)
    Impedance: 8ohm
    Frequency response: 500Hz~10KHz(-5dB@20KHz)
    Outer frame: 5 1/8" (H) x 12 1/2" (W)
    Required cutout: 3 7/8" (H) x 11 3/8" (W)
    Mounting Bolt pattern: 4 3/8" (H) x 11 13/16" (W)
    Overall depth: 8."
    These are GREAT for DIY projects that are a  bit better than entry level components. Great for automotive. monitors, and medium size PA
    NEW UNITS
    Grab them while they last!!!
    I have crossovers if needed.