Super Fine Cleaning Milk Filter - Capacity Up to 500 kg

Description

High-effective Milk Filter
The most effective system to cleanse milk of somatic cells
The Kit includes 01 steel case and 30 disposable filters per BOX 📦🛒🛍
Working principle: Dirty milk is fed into the filter housing through the lower inlet nozzle and, under the influence of pumping pressure, passes through the cartridge from the center to the periphery. Through the prom nozzle on the wall of the body, you get premium milk with low somatic cells.
The filter layers are in accordance with the exclusive patented SomaticStop technology: the multilayer cylindrical channels of the filter element are seamlessly formed in transition to discrete layers of fibers obtained by aerodynamic extrusion of food-grade polypropylene.
The smooth transition between layers reduces the gaps in the flow between the layers and the hydraulic resistance of the filter element, increasing its performance. The polypropylene micropyles meet at angles to the fibers in such a way that dirt and somatic cells get stuck in them, and the fat balls, which have the ability to shrink and stretch, pass through the smallest channels of the filter element without staying in it.
Highest grade of milk,
due to the unique winding of polypropylene yarn with polygonal cells down to 3 microns
Limpieza de somática y lodos de las partículas de barro más pequeñas,
thanks to patented Somatic Stop technology for combining frame and filter layers
Increase the number of clients and strengthen the reputation,
thanks to the production of milk with stable organoleptic properties: smell, color, taste and homogeneous consistency
Preservation of milk fat content,
because the filter microvilli does not delay the elastic fat ball that passes freely through the filter cells
Installing a straight milk line anywhere,
thanks to the convenient arrangement of the nozzles in the line and the set of return parts with any type of fixation
High dirt capacity of the filter,
due to 120 layers of frame and filter arranged in a certain order for better filtering
Characteristics
Filter material - Polypropylene Food PP H030
Number of layers - 150
Dimensions -
42 x 90 x 20
Fine filtration -
3 μm
Pressure -
Up to 1.5 atm
Filter resistance - 0,2 - 0,5 atm
Bandwidth - up to 500 liters
Mach temperature -
130°
Installation
Filter set: in front of the cooler when filtering during milking
To install the filter, select a straight section of the milk pipe near the refrigerator
Cut the pipe (hose) where you are going to install the casing and weld or clamp the casing mounting kit with a clamp.
Install the carcass in the milking system by connecting the inlet and outlet nozzles to the appropriate fasteners.
The milk enters the filter housing through the inlet in the lower housing cover and passes under pressure through the filter element. Pure milk comes out of the spout on the side wall of the case
The seals for the clamps must go into the grooves of the bracket cover and the nozzles, then the body will be absolutely sealed
The filter is installed after the pump
Terms of Use
The filters are recommended for use in hot milk during milking to prevent impurities from dissolving.
To avoid hydraulic shock, after installing the filter, first open "IN", then after filling the case with milk, gently open the "OUTPOUT".
After passing the declared amount of milk through the filter at the end of milking, the replaceable UVMILK® ULTRA cartridge is removed and disposed of as solid waste (solid household waste). Hazard class 5 is the safest).
The system is flushed and a new cartridge is installed at the next milking each time to avoid increased insemination and milk souring.
The lamp seal should fit evenly into the groove in the housing cover so that the case is completely sealed.
The silicone seals in the case should be changed once every six months.
For the effective operation of the filter ULTRA 0.5, it is necessary to have a previous level of filtration: the high performance milk filter UVMILK® Misro.
The filter element must be used for a single milking.